Topics
Recent Articles
Why Is Silicone Bad as a Saw Table Lubricant?
A table saw is a fantastic tool that adds great value to a woodworker’s projects, but only when working correctly. Part of taking care of a table saw includes cleaning and changing anything that needs to be changed. Ensuring proper lubrication makes a table saw run without any hiccups. This means that the woodworker must…
Why Is My Table Saw Stopping in Wood?
It is very frustrating to a woodworker when a table saw stops in wood. Such an interruption can delay work. Well, any machinery has its downtimes; a table saw is no different. Stopping in wood is one of the problems that woodworkers encounter with table saws. Why Is My Table Saw Stopping in Wood? Table…
Why Doesn’t My Band Saw Cut Straight?
Band saws are some of the popular machines in the saw family and are used for cutting foam, wood, metal, and more. Most woodworkers use the band saw for getting zigzag cuts for unique designs rather than achieving a straight and even cut on their work piece. Why Doesn’t My Band Saw Cut Straight? A…
Why Does My Table Saw Cut a Notch at the End of the Board?
A woodwork professional is defined by how well they can perform different tasks with a table saw. Making notches is not easy, but over time, one masters the art using the wide range of tools available in the workshop. Learning to cut notches helps strengthen wooden structures as well as increase their longevity. Yet, you…
Why Does My Table Saw Burn Wood?
Burn marks are not very pleasant on wood, especially when they are unwanted. However, they cannot be entirely avoided in the course of working with a table saw. A woodworker needs to understand their causes, which will lay proper grounds for troubleshooting them. So, why does my table saw burn wood? Why Does My Table…
Why Does a Circular Saw Bind?
Circular saws are very popular because they are handheld, portable, and easy to use. It’s a very efficient tool when used correctly. Like any other tool, it comes with its share of safety hazards, binding being one of them. A circular saw bind results in a kickback, so it is crucial to understand the causes…
Why Does a Table Saw Motor Get Hot?
A well-utilized table saw motor may develop some problems over time, for example, overheating or hard starting. That’s why it’s vital that you keenly monitor it to avoid motor damage that arises from overheating. So, why does a table saw motor get hot? Why Does a Table Saw Motor Get Hot? A table saw that…
Why Cut to the Left of the Blade on a Table Saw?
The rule of thumb is that your cutting position on a table saw depends on your handedness. You should place the fence on the side of the blade where your dominant hand is located.The cutting position is also determined by the tilt of the blade, i.e., whether the blade tilts to the left or to…
Why Can’t You Use Shop Vac With Table Saw?
A shop vac is a special type of vacuum often used in woodworking and construction. It consists of a high-powered motor and a suction system that sucks up dirt, debris, pieces of wood, and other materials from work sites. Though very popular, a shop vac is not often the best equipment that you can use…
Why Can’t I Cut Straight with a Circular Saw?
If you are unable to cut straight using your circular saw, you first need to check the positioning of the workpiece. The problem could simply be that the workpiece in unstable and needs clamping. You should also check the saw to see whether it is okay. You also need to check whether you are holding…
Why Build a Table Saw Sled?
A table saw crosscut sled is an important accessory for your table saw. The device makes it easier for you to make perfectly square and replicable crosscuts more consistently than when you use a miter gauge. Since every table saw comes with a miter gauge, it is a great idea to build your own table…
What Wax to Use on Table Saw?
A table saw is made of sharp blades bulging out of the top of a table. The blades are sharp and rigid enough to help you make a variety of wood cuts. However, only a lubricated table saw will make your wood cutting job a lot easier. What Wax Should You Use on Table Saw?…About
sawshub.com is the premiere website for educational guides and product reviews about power tools and handheld saws. We focus our efforts at providing you with clear, actionable tips so that you can learn what you need and execute your project successfully.
We review various saws and related tools on our website. All of our reviews are our own, and are not influenced by any third parties.
Get to know more about the SawsHub team, composed of Jared, Dennis, and Allen. Happy Woodworking!