Makita 5007F Circular Saw Review

Circular saws can make your work on the job site much easier if they have the right features and good performance. The Makita 5007F has many features that make your work simpler and faster. It can also save you vital time on the job, giving you more time to work on other projects or to spend at home with the family.

Makita 5007F Main Features

The Makita 5007F has many main features that are worth noting. Overall, it’s a well-made circular saw that is used by builders, framers, and siding contractors all over the country. Here are some of the main features that make it one of the best circular saws on the market:

• 15 Amp Motor
• 5,900 RPM
• Heavy gauge wraparound base made of aluminum
• Built-in dust blower
• Lower guard design gives better performance when making narrow cuts
• 2 3/8” depth cut at a 90-degree angle
• 1 3/4” depth cut at a 45-degree angle
• AC/DC switch allows you to use alternative power sources if needed
• Shaft is in a perfect position for when you need to lock it or replace the blades.

Best Features Highlighted

Now that you have the main features of this circular saw in mind, you might be wondering what they mean or what makes them so special. If this is your first circular saw, it can also be hard to compare the Makita 5007F since you don’t have any references.

Here is a breakdown of the best features and how they make cutting and working much easier:

• Portability: If you can’t leave your circular saw at the job site, or if you need to travel with it to many different job locations, you need to make sure it’s portable and won’t break your back when moving it from the car. The Makita 5007F is only 11.1 pounds and 12 inches long. It’s easy to move around and doesn’t take up much space. 
• Overall Usability: There are many parts of the Makita 5007F that make it easy to use. One of the main ones is the great dust blower. The motor never gets clogged and without dust in your line of sight, you can make cuts easier and more efficiently. The lower guard design also makes the saw easier to use if you plan to make bevel cuts or narrow cuts. 
• Power: Power is important when it comes to any saw. The 15 amp motor is slightly higher than other circular saws you’ll find on the market. The 5, 800 RPM is where it gets most of its power though. This is much higher compared to other Makita circular saws and saw of other name brands.

Motor Speed

If you have a job or work to do that requires cutting of large and thick materials, the 5,800 RPM on this circular saw is more than enough to get the job done. Most circular saws start at an RPM of just 3,000, so you can really feel the power difference when using the Makita 5007F.

Motor Cooling System

Overheating is one of the main complaints when it comes to using circular saws. Not only is this dangerous, but it can also cause you to delay work because you need to stop and wait for the saw to cool down again before re-starting.

The Makita 5007F has a baffle system and centrifugal fan that allows you to use the saw for hours at a time without the concern of overheating. This can greatly increase productivity and allow you and your workers to leave the job site at a reasonable hour every day.

LED Lighting

The Makita 5007F has other notable features work mentioning. One of the main things that users rave about is the LED guiding lights. These are especially useful if you are using circular saws for the first time or if you often work in a dark space where you could benefit from some extra light

Even during the daytime, the LED lights are bright enough to see and you can use them to guide your alignment when cutting.

Dust Blower

The dust blower is also one of the best ones on the market because it keeps the workspace clear and ensures that the motor doesn’t get clogged or overheated.

In some other models, the dust blower does isn’t strong enough to get rid of all the debris on the table and you’re still stuck using a different blower or cleaning up yourself.

A Few Cons

While the Makita 5007F is a great circular saw, like all saws, there are some cons to be aware of. None of them are major, but they are worth noting to help you make a final decision before buying the saw or not.

The main complaint is that the footplate is not magnesium. It’s aluminum though, so you still get a heavy-duty footplate. However, many seasoned circulars saw users know that magnesium footplates tend to have better stability and durability.

The good news is that the Makita 5007MG has a magnesium footplate and still gives you a 15 amp motor and 5,800 RPM.

While the Makita 5007F is only 11.1 pounds and still pretty portable, it’s not as portable as other mini circular saws since there are some on the market that weighs 10 pounds or less.

If you are really concerned about the weight of the saw and have to move around often, you might want to go with something like the Skil 5280-01 – t’s only 6.95 pounds.

Keep in mind though that any saw that is lower in weight, might be missing certain features or might have lower speeds. You’ll need to decide if weight or speed is more important to you.

Final Thoughts

Overall, the Makita 5007F is one of the top reviewed circular saws by builders and contractors. The high speed and cutting capacity make it easy to get in a full day of work with accuracy and precision. The main complaints come with the aluminum footplate and the weight since it’s over 10 pounds.